Acoustic Image Ten2 S4 Plus 650-Watt Combo Amp


Always Free Shipping
Add to Cart:

  • Model: Ten2 S4 PLUS
  • Shipping Weight: 30lbs
  • Units in Stock: 1

Additional Images

The goal for the Ten2 was to produce a 2x10 combo amp unlike any other. We wanted it to be smaller and lighter than any other on the market and we wanted it to be "in the family" sonically but with the more up front sound usually associated with a front firing cabinet.

The Ten2 was designed to play louder than our other combos to give the player more flexibility in the settings in which the amp is played. For example, the Ten2 is comfortably used in electric bass situations that would be too loud for our other combos. The Ten2 has the added versitility of the removable 600W head for even louder situations.

Small size and light weight were paramount. At 32 lbs and 17 inches tall, the Ten2 is the smallest and lightest 2x10 combo on the market. The Ten2 EX is even smaller and lighter at 25 lbs and 14 inches tall. Even with the compact size, this is a "no compromise" combo. The head unit is the same as the Clarus with all of the features needed to meet the most stringent requirements of musical instrument amplification.

The broad frequency response, high power output and smooth, high fidelity sound make the Ten2 the ideal combo for all applications: acoustic bass, electric bass, guitar, keyboards, vocals, etc. Think of it as a high performance, compact PA system.


The two-channel, Series 4PLUS Ten2 has two separate channels which can be used to blend two sources - two different pickups or mics (or a combination of the two), or two different instruments. The XLR and ¼" inputs are on separate jacks. Additionally, they are separately buffered, which means that you could effectively use both at once, on each channel. You would only have independent control if at least one of those sources had its own volume control (like a keyboard, or an instrument with an outboard active preamp) but it does open up the possibility of actually "mixing" up to four different sources.

The preamp features a new four-channel equalizer, as follows:

Low: Shelving, ±12dB at 50Hz Lo Mid: ±12dB at 250 Hz Hi Mid: ±12dB at 1200 Hz Treble: Shelving, ±12dB at 8 kHz

The built-in Digital Effects can be assigned to either channel (or both/neither), and the amount of the effects in your mixed signal can be adjusted with the level knob. The rate setting is now configurable (!) and the effects include the following presets:

Reverb Delay Reverb PLUS Delay

One last new feature - illuminated on/off buttons for the front panel controls to indicate whether the button is on (lit) or off (unlit). This is really helpful on a dark stage!


Balanced, high fidelity sound, a little more “up front” than our other combos

Two-way sealed speaker system

10" downfiring woofer

10" front firing woofer

2.5" coaxial tweeter

Phase correcting crossover

Exclusive Room Coupling Control(tm) to help tame boomy acoustic settings

Lightweight (34 lbs), small (17 in high) molded polymer enclosure

Cabrio Docking System(tm) means head is removable for use as stand-alone unit

Available with one or two channel preamp

Separate 1/4" and XLR input jacks per channel

Phantom power on XLR inputs

4-band tone controls

Input and master level controls

Effects loop with return level control per channel

Switchable low cut filter per channel

Phase reverse switch per channel

Balanced direct out with ground lift

24-bit digital reverb, delay, and reverb/delay with rate controls!

Mute switch and pre/post EQ for direct out

Switchable limiter for high volume situations

Stereo capable with external power amp (2 ch preamp)

Headphone output

600 watt switch mode power amplifier

Switchable dual voltage operation (100-115V/220-240V)

Comes with fitted slip cover with cord storage pocket and shoulder strap

This product was added to our catalog on Monday 30 November, 2015.

wabusiness template